Icon Audio HP8 Mk2 Headphone amp
Beautiful Versatile Affordable – No Compromise High End Pure Valve Headphone Amplifier suits headphones 8 – 600 Ohms
Connect HP8-2 to HiFi speakers instead and make a very brilliant tiny system, ideal for beadrooms and offices. Plus a Project Dock Box and hey presto…. the best little iPod dock in town….?
- Additional information
Specially designed for the British Hi Fi market by David Shaw in Leicester.
The conventional way to provide a headphone output on an amplifier is to drop the power through a resistor. This has a big problem that it provides very high source impedance (rather like a weak battery) the effect of this is to give very “Low FI” results. Ideally headphones should be driven from small high quality amplifiers. Many headphone amplifiers use small “microchip” amps which although are a better solution still do not provide ideal matching to the wide range of headphones available.
Our HP8 MKII is in fact a miniaturised pure valve hi fi amplifier. We use a custom wound multi-tap output transformer which provides perfect matching to virtually any headphone load. We start with a substantial mains transformer with matching power supply and two output transformers. The HP8 MK II tops the scales at 7kg, giving you an idea of how much iron you get for your money!
Like our other models the HP8 MKII has no printed circuit board and is all hard wired with top quality components. We use silver Teflon audio cable, gold plated terminals and the famous “ALPS” volume pot for sonic purity.
The first stage gain uses the excellent JJ 12AX7. This wonderful valve has exceptional detail and fluidity. Its smoothness complements the super 6SN7 (the best hi fi valve ever?). This combination will give you a simply stunning insight into inner detail of your favourite recordings whether Analogue or digital.
Like our other amplifiers, close attention has been paid to the finish of the HP8 MKII. It uses the same “Bullet Proof”* build (*Hi Fi News/Hi Fi Choice) as our other amplifiers with a combination of anodised alloy plate, stainless and painted steel. We do not use “tin and plastic”!
For space saving we have used the same “lengthways” chassis as our phono pre-amp so it will fit nicely alongside your existing equipment, with the connections on the rear, and headphone socket at the front.
The HP8 MKII is very versatile. It may be connected to your hi fi in several ways: 1, In a normal hi fi system you would connect to the “record out” of your amplifier. This will then be directly connected to the “source” that you have selected.
2, If your amplifier does not have a suitable output, splitter leads may be used. 3, With “Pre and power” systems a connection may be made between the two units.
4, As a stand alone unit you can directly connect to any CD/MP3 phono pre-amp.
Specifications and Features
Comprehensive manual supplied
Full instructions for valve change included
All hand wired point to point
No printed circuit board to ‘colour’ sound
Japanese Blue ALPS volume pot.
Class A, all Triode circuit
Output impedance matching from 8 to 600Ω
2 x Shuguang 6SN7
NOS, Treasure and Full Music types available
1x ECC83 first stage valve
Signal to noise level -90db
Freq response better than 20hz-20kHz +0 –0.2db
Total harmonic distortion typically less than 0.2% 1khz
Suitable for 4-8 ohm high efficiency loudspeakers
Japanese steel EI transformers with low oxygen copper
Slim profile design
High quality 2W metal film, & wire-wound resistors
Blue LED mains indicator
Polypropylene audio capacitors
Silver TEFLON audio cable
Custom hand wound output transformers
Ceramic valve holders for minimum leakage
Gold plated Input & speaker terminals
One line input
350mv input sensitivity.
230/240volts 36 watts.
C E, ROHS and WEEE compliant
11cm W, 35 cm D, 14.8 H, 6.5 kg (remember to allow