Graham Audio LS8/1
The LS8/1 is Graham Audio’s take on the classic 8 inch bass driver in a 2 cubic foot box format, as used by many designers over the years, including our own Derek Hughes (and his father Spencer, who of course designed the BBC LS3/6).
Exceptional clarity in the tops and mids with a warm and rounded low end. You’ll hear things on these you haven’t before!
The Graham Audio LS8/1 draws on decades of experience and modern techniques. High temperature motor design and materials permit much greater power handling than ever, while building on the midrange openess and resolution of the original LS3/6. Sophisticated soft-dome units are used for the tweeter and super-tweeter, both with protective metal grilles, and in common with many Graham Audio designs, the HF level can easily be adjusted from the front panel to help match the loudspeakers to the acoustic environment they are being used in. To do so, the grille can readily be removed as it is held in place with concealed magnets. As with the original LS3/6, the front and rear panels are attached to the cabinet with srews rather than glued joints, helping to reduce colouration by decoupling the panels, and easing future maintenance, should that become necessary. High quality birch ply is used beneath the premium hand-matched veneers.
|3 Way, reflex loading
|Thin wall damped construction, birch plywood
|Real wood veneer
|30cm by 63.5cm by 30cm
|45Hz to 20kHz, ±3dB
|87dB SPL (2.83V, 1m)
|Over 100dB for a pair at 2m
|26mm soft dome
|19mm soft dome
|Recommended amplifier power
|50 to 250 watts unclipped programme